Amber Night Black Terrazzo Slab

Description

This balance makes the material relevant to retail, hospitality and other design-led interiors that need a dark surface without the directional veining of marble. The catalog lists 2700 × 1800 × 20 mm as the reference slab size. The binder system, aggregate composition and available finish must be confirmed before specification.

Aoli Stone can review samples, current full-slab images, finish expectations and project drawings, then confirm the appropriate processing, inspection and packing scope. For a useful quotation, send the application, required dimensions, finish, quantity and destination.

Why This Terrazzo Works for Project Buyers

• The charcoal-black base creates a strong visual anchor without relying on printed veins or directional movement.

• White and ivory fragments add contrast, while muted amber chips introduce warmth for wood, bronze-toned metal and neutral interior palettes.

• The dense mixed grading reads more evenly at room scale than the close-up alone suggests.

• The random pattern reduces the need for vein matching, although chip-distribution and colour-range approval are still required.

• The listed slab format gives buyers a basis for discussing wall panels, floor modules, counters and custom pieces after drawing review.

• A sample-plus-full-slab approval process can reduce disputes about black tone, aggregate scale, finish and large-area appearance.

Material Character and Aggregate Design

Amber Night is visually a charcoal terrazzo with white and amber chips. The matrix appears near-black in the close-up and slightly lighter charcoal under the brighter full-slab lighting. Buyers should therefore approve the colour under a controlled lighting condition instead of selecting the material from one screen image.

The visible aggregate contains milky-white, ivory and pale grey fragments, selected black or charcoal pieces and muted amber-to-light-terracotta accents. These are visual descriptions only; the actual aggregate composition remains marble and other chips.

The chip structure is dense and mixed-scale. Numerous micro-fragments fill the areas between small and medium angular pieces, with occasional larger fragments adding close-range variation. The surface is non-directional and does not behave like veined marble.

At design level, this black and amber terrazzo stone is more dramatic than a grey or white neutral terrazzo, but the warm chips prevent it from reading as a cold monochrome surface.

Important approval note: A small sample can confirm the matrix direction, chip colour family and finish direction, but it cannot fully represent full-slab chip distribution, cluster density or appearance under project lighting.

Best For

This material is best considered by importers, distributors, architects, interior designers and project buyers looking for a black terrazzo slab for luxury retail interiors, hospitality feature areas or custom interior elements.

It is particularly relevant when the design needs:

• a dark surface with visible mineral contrast;

• warm aggregate accents rather than a pure black-and-white palette;

• a non-directional pattern for floors, walls or fabricated elements;

• sample, slab-image and drawing review before order confirmation.

Specification Matrix

Recommended Applications

1. Retail floors and circulation zones

Why it may suit the application:
The dark base can define feature zones, entrances, checkout areas and selected circulation spaces, while the white and amber fragments keep the floor visually active. This is the page’s primary black terrazzo retail flooring use case.

Confirm before specifying:
Binder system, finish, slip requirement, tile module, joint layout, thickness, substrate, cleaning regime and applicable project test requirements.

Buyer should provide:
Floor plan, traffic context, required module or cut sizes, finish expectation, quantity, installation location and destination.

2. Feature walls and wall panels

Why it may suit the application:
The high-contrast chip field remains readable vertically and can create a dark visual backdrop for merchandise, reception areas or lift lobbies.

Confirm before specifying:
Panel dimensions, weight, fixing system, substrate, joint width, edge visibility, access and handling method.

Buyer should provide:
Elevations, panel schedule, wall build-up, fixing concept and visible-edge requirements.

3. Checkout counters, reception desks and counter cladding

Why it may suit the application:
Warm amber fragments can coordinate with timber, bronze-toned metal and warm lighting, while the dark matrix gives a strong retail or hospitality identity.

Confirm before specifying:
Finish, stain and maintenance expectations, exposed-edge treatment, build-up thickness, joints, cutouts, support and service access.

Buyer should provide:
Shop drawings, cutout positions, edge profile, support structure, use environment and required quantities.

4. Display plinths, tabletops and custom furniture elements

Why it may suit the application:
The non-directional pattern can work across several faces without requiring vein alignment. Exposed edges can also reveal the mixed aggregate structure if the edge finish is approved.

Confirm before specifying:
Span, support, joint locations, edge build-up, radius, transport dimensions, assembly method and whether the form is cut-and-joined rather than bent.

Buyer should provide:
Dimensioned drawings or 3D details, support method, edge condition, visible faces and installation sequence.

5. Stair treads, risers and landings

Why it may suit the application:
The dark matrix and dense aggregate can create a coherent stair feature in retail, hospitality and other interior spaces.

Confirm before specifying:
Finish and slip requirement, nosing detail, tread/riser dimensions, substrate, piece numbering, dry-lay need and packing sequence.

Buyer should provide:
Stair schedule, section detail, nosing profile, finish requirement, quantity and installation responsibility.

Not Suitable or Confirm Before Use

• Do not assume exterior, façade, UV, freeze-thaw or exposed-weather suitability without verified system-specific data.

• Do not specify for shower floors, ramps or other safety-critical wet areas without the required finish and slip test.

• Do not assume stain, chemical, heat or food-contact performance for restaurant worktops or food-preparation surfaces.

• Do not use the slab as an unsupported structural element; support and fixing must be designed for the application.

• Do not expect an exact chip-for-chip match between a small sample, different slabs or separate production batches.

• Do not present the product as seamless in-situ Venetian terrazzo; the supplied evidence shows a slab product.

Finish, Thickness, Format and Edge Options

The only current dimensional evidence is the catalog reference 2700 × 1800 × 20 mm. Confirm whether this is the current stocked format, the normal production format or a catalog reference before publishing it as “available.”

The finish cannot be identified reliably from the photographs. Request labelled finish samples or controlled angled-light photographs before stating polished, honed, matte or another finish.

Cut-to-size pieces, cutouts, mitred or built-up edges, eased edges, stair nosings and shaped pieces should be discussed from drawings. Availability depends on the confirmed material system, piece size, support and processing limits.

Fabrication and Project-Supply Considerations

1. Exposed edges: The aggregate will cross the finished edge. Approve an actual edge sample when the edge is a visible design feature.

2. Cutouts and inside corners: Sink, service and fixture cutouts require a fabrication review, including corner treatment, remaining material width and support.

3. Large panels: Review panel size, weight, lifting, access, fixing and packing rather than assuming that the full catalog slab can be installed as one unsupported panel.

4. Floor layout: The pattern is non-directional, but slab or tile placement should still control broad colour and density variation.

5. Custom furniture: Curved-looking forms may need segmented cutting, profiling and joining. Bending is not implied.

6. Replacement pieces: Record batch, finish, thickness and approved range. A later replacement may not reproduce the original chip placement exactly.

Variation, Sample Approval and Quality Control

The approval process should define what the sample confirms and what requires larger-scale evidence.

Before order confirmation, buyers should review:

1. the approved matrix colour range under agreed lighting;

2. the white, grey, dark and amber chip colour families;

3. the expected factory chip-size range [CONFIRM];

4. acceptable chip-density and clustering variation;

5. the labelled finish sample;

6. the 20 mm reference thickness and any tolerance [CONFIRM];

7. current full-slab photographs or video from the intended batch [CONFIRM AVAILABILITY];

8. visible edge treatment and cutout detail when relevant;

9. agreed inspection evidence before packing;

10. packing, labelling and unloading requirements.

For an order where these services are agreed, Aoli Stone can coordinate sample approval, production-image sharing, slab or cut-piece inspection, thickness and size checks, visual-range review, dry lay for relevant cut-to-size scopes, item labelling and export-packing review. The actual scope must be written into the quotation or order confirmation.

Price, MOQ, Packing and Lead Time

The product images alone do not establish a reliable price. A comparable quotation requires the confirmed material system, finish, size, thickness, quantity, cut-to-size scope, edge/cutout work, inspection scope, packing method and destination.

• Current stock: [CONFIRM]

• Sample availability: [CONFIRM]

• MOQ: 300 square meters

• Lead time: 15–20 days after deposit 

• Payment terms: T/T, L/C, Cash

For buyers comparing black terrazzo slab suppliers in China, the useful comparison is not unit price alone. Confirm that every quotation uses the same material system, finish, thickness, dimensions, processing, inspection and packing scope.

FAQ

Is Amber Night cement terrazzo or resin terrazzo?

The binder system is [CONFIRM]. Do not approve the product only by colour, because the system affects application review, finish, maintenance, installation and technical documentation.

What size is shown in the catalog?

The catalog lists 2700 × 1800 × 20 mm. Confirm whether that format is currently in stock, produced to order or used only as a reference before placing an order.

Will a full slab look exactly like the close-up sample?

No. The close-up can show matrix direction, chip colours and local detail, but a full slab will read finer from a distance and may show reasonable differences in chip placement, clustering and tone.

Can this terrazzo be used for retail flooring?

It is visually suitable for consideration, but final suitability depends on the confirmed binder, finish, slip requirement, thickness, tile/slab module, substrate, traffic context and local project requirements.

Can Aoli Stone cut it to project sizes?

Cut-to-size, cutouts, edges and shaped pieces should be confirmed after reviewing drawings, piece dimensions, material system, support and packing requirements.

What finish is available?

The photographs do not reliably prove the finish. Available finishes and their visual/maintenance implications are confirmed. Request a labelled finish sample.

What is the MOQ and lead time?

They should be checked against current stock, quantity, format, processing scope and production schedule.

How should it be packed for export?

The packing method should match the shipped form—full slabs, tiles or cut-to-size pieces—and the destination handling conditions. Confirm separation, edge/corner protection, crate or bundle structure, labelling and unloading access before order confirmation.

Send the material palette, floor plan, elevation or counter detail. Aoli Stone can help compare the close-up and full-slab appearance, identify the finish and thickness decisions still required, and prepare the right sample review.

Request the current sample, neutral-light full-slab photos, confirmed material system, available format list and packing reference. Include your market, preferred size, estimated quantity and destination port.